MANUAL CONTROL VALVE AND FITTINGS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
766

TM 9--2350--292--20--2 0569 00--1 MANUAL CONTROL VALVE AND FITTINGS REPLACEMENT 0569 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Pipe wrench (item 44, WP 0717 00) Open--end wrench (item 75, WP 0717 00) Materials/Parts Lockwashers (4) (item 2, WP 0718 00) Gasket (item 102, WP 0718 00) Sealing compound (item 16, WP 0716 00) Equipment Conditions Defuel access door opened (TM 9--2350--292--10) Right engine access grille door opened (TM 9--2350--292--10) Hydraulic lines and fittings removed from manual control valve (WP 0566 00) References TM 9--2350--292--10 Removal 1. Loosen pipe locknut (1), remove pipe elbow (2) and pipe locknut (1) from manual control valve (3). 2. Loosen pipe locknut (4), remove pipe elbow (5) and pipe locknut (4) from manual control valve (3). 3. Remove pipe elbow (6) from pipe nipple (7). 4. Remove pipe nipple (7) from pipe tee (8). 5. Loosen pipe locknut (9), remove pipe elbow (10) and pipe locknut (9) from pipe tee (8). 6. Loosen pipe locknut (11), remove pipe tee (8) and pipe locknut (11) from manual control valve (3). Figure 315 6 7 8 9 10 11 2 1 3 4 5 FORWARD

Privacy Statement
Press Release
Contact