TM 9--2350--292--20--20569 00--2MANUAL CONTROL VALVE AND FITTINGS REPLACEMENT -- CONTINUED0569 00Removal--Continued7. Loosen pipe locknut (12), remove pipe elbow (13) and pipe locknut (12) from pipe tee (14).8. Loosen pipe locknut (15), remove pipe elbow (16) and pipe locknut (15) from pipe tee (14).9. Loosen pipe locknut (17), remove pipe tee (14) and pipe locknut (17) from pipe tee (18).10. Loosen pipe locknut (19), remove pipe elbow (20) and pipe locknut (19) from pipe tee (18).11. Remove pipe tee (18) from metallic pipe (21).12. Remove metallic pipe (21) from pipe elbow (22).13. Remove pipe elbow (22) from manual control valve (3).14. Loosen two set screws (23) and remove handle (24) from manual control valve (3) shaft.15. Remove four screws (25), four lockwashers (26), manual control valve (3) and gasket (27) from compartment wall.Discard lockwashers and gasket.16. Inspect parts for damage and replace as required.Figure 31512131415161718192021223262523242723
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
