TM 9--2350--292--20--2
0584 00--1
HYDRAULIC HOSE RETAINER AND RETAINING COVERS REPLACEMENT
0584 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (12) (item 9, WP 0718 00)
Equipment Conditions
Engine deck assembly removed (WP 0417 00)
For maintenance of retainer covers #4, #5, #6 and #7
Air intake tube loosened (WP 0212 00)
For maintenance of retainer cover #4
Left engine deck grille door removed (WP 0415 00)
For maintenance of retainer cover #7
Main winch and spade assembly removed
(WP 0498 00)
For maintenance of retainer #9 and retainer cover
#15
NOTE
There are five types of hose retainers, four of these re-
tainers only the covers can be removeOne retainer and
cover is removable.
Perform Removal steps 1 and 3 and Installation step 2 for
maintenance of retainer covers.
Perform Removal steps 2 and 3 and Installation step 1 for
maintenance of retainer and cover.
Removal
1. Remove two screws (1), two lockwashers (2), two flatwashers (3) and retainer cover ( 4, 5, 6 or 7) from vehicle.
Discard lockwashers.
2. Remove two screws (1), two lockwashers (2), two flat washers (8), retainer (9) and cover (10) from vehicle. Dis-
card lockwashers.
3. Inspect parts for damage and replace as required.
