TM 9--2350--292--20--2
AUXILIARY POWER UNIT WIRING HARNESS CABLE CLAMPS
REPLACEMENT
0592 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 287, WP 0718 00)
Equipment Conditions
APU engine duct removed (WP 0622 00
or WP 0623 00)
Removal
1. Remove two screws (1), two lockwashers (2) and cable clamps (3 and 4) securing two wiring harnesses (5) to
APU assembly (6). Discard lockwashers.
2. Inspect parts for damage and replace as required.
Installation
Secure two wiring harnesses (5) to APU assembly (6) with cable clamps (3 and 4), two screws (1) and two new lock-
washers (2).
Figure 333
1
2
3
1
2
4
6
5
NOTE
FOLLOW--ON MAINTENANCE:
Install APU engine duct (WP 0622 00 or WP 0623 00)
END OF TASK
0592 00--1/2 blank
