TM 9--2350--292--20--2
0593 00--2
AUXILIARY POWER UNIT ENGINE IDENTIFICATION PLATE AND DECAL
REPLACEMENT -- CONTINUED
0593 00
Removal -- Continued
2. Remove four drive screws (2) and identification plate (3). Discard drive screws.
3. Inspect parts for damage and replace as required.
Installation
1. Install identification plate (3) with four new drive screws (2).
WARNING
WARNING
2. Thoroughly clean area with dry--cleaning solvent.
3. Apply decal (1) in the same position, ensure decal (1) completely covers manufacturers’ stenciled starting and
servicing data. Apply protective coating of lacquer or varnish.
Figure 333
1
2
3
NOTE
FOLLOW--ON MAINTENANCE:
Install APU cover (WP 0413 00)
END OF TASK
