TM 9--2350--292--20--2
0595 00--3
AUXILIARY POWER UNIT THROTTLE ADJUSTMENT LINKAGE
REPLACEMENT (HATZ) -- CONTINUED
0595 00
Installation--Continued
4. Install throttle adjustment assembly (12) on stationary bracket (7) with new retaining ring (11).
5. Install new gasket (10) to cover plate (9) using adhesive (item 25, WP 0716 00).
NOTE
Apply adhesive (item 29, WP 0716 00) to thread of
screws before installation.
6. Install stationary bracket (7), cover plate (9) and new gasket (10) with four flat washers (8), two clamps (6), two
flat washers (5), two new lockwashers (4) and two screws (3). Torque screws to 20--22 lb--ft (27--29 NSm).
7. Install adjustment block (2) to throttle lever using new retaining ring (1).
1
2
3
4
5
6
7
8
9
10
11
12
