TM 9--2350--292--20--2
0595 00--4
AUXILIARY POWER UNIT THROTTLE ADJUSTMENT LINKAGE
REPLACEMENT (HATZ) -- CONTINUED
0595 00
Adjustment
1. Rotate knurled knob (18) to move the throttle lever (19) until it makes contact with the speed control screw (20).
NOTE
Apply adhesive (item 29, WP 0716 00) to thread of set
screws before installation.
2. Install set screw (13) in adjustment block (2). Torque set screw to 96--120 lb--in (10--13 NSm).
3. Install set screw (15) in stationary block (16). Torque set screw to 96--120 lb--in (10--13 NSm).
19
20
2
13
19
20
13
2
15
18
16
18
15
16
NOTE
FOLLOW--ON MAINTENANCE
Install APU in vehicle (WP 0587 00)
END OF TASK