TM 9--2350--292--20--2
0595 00--2
AUXILIARY POWER UNIT THROTTLE ADJUSTMENT LINKAGE
REPLACEMENT (HATZ) -- CONTINUED
0595 00
Removal--Continued
4. Remove set screw (13) from adjustment block (2) and unscrew adjustment block (2) from adjustment screw (14).
5. Remove set screw (15) and stationary block (16) from adjustment screw (14).
NOTE
Remove the attaching hardware in step 6 only if the parts
are damaged.
6. Remove spring pin (17) and knurled knob (18) from adjustment screw (14). Discard spring pin.
7. Inspect all parts for damage and replace as required.
Installation
1. Install knurled knob (18) on adjustment screw (14) and insert new spring pin (17), if removed.
2. Install stationary block (16) on adjustment screw (14).
3. Install adjustment block (2) on adjustment screw (14).
2
13
14
16
15
17
18
