TM 9--2350--292--20--2
0595 00--1
AUXILIARY POWER UNIT THROTTLE ADJUSTMENT LINKAGE
REPLACEMENT (HATZ)
0595 00
THIS WORK PACKAGE COVERS:
Removal, Installation, Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Torque wrench (item 2, WP 0717 00)
Retaining pliers set (item 15, WP 0717 00)
Torque wrench (item 21, WP 0717 00)
Screwdriver attachment, hex (item 125, WP 0717 00)
Screwdriver attachment, hex (item 126, WP 0717 00)
Materials/Parts
Retaining ring (item 476, WP 0718 00)
Retaining ring (item 477, WP 0718 00)
Lockwashers (2) (item 465, WP 0718 00)
Gasket (item 478, WP 0718 00)
Adhesive (item 25, WP 0716 00)
Adhesive (item 29, WP 0716 00)
Equipment Conditions
APU removed from vehicle (WP 0587 00)
Removal
1. Remove retaining ring (1) from adjustment block (2). Discard retaining ring.
2. Remove two screws (3), two lockwashers (4), two flat washers (5), two clamps (6), stationary bracket (7), four flat
washers (8), cover plate (9) and gasket (10). Discard lockwashers and gasket.
3. Remove retaining ring (11) from throttle adjustment assembly (12). Discard retaining ring.
1
2
3
4
5
6
7
8
9
10
11
12
