TM 9--2350--292--20--2
0597 00--2
AUXILIARY POWER UNIT OIL FILTER ASSEMBLY, LINES AND BRACKET
REPAIR (HATZ) -- CONTINUED
0597 00
Removal--Continued
3. Remove reducer (7), elbow (8) and pipe nipple (9) from mounting plate (2).
4. Remove reducer (10) and elbow (11) from mounting plate (2).
5. Remove oil adapter cap (12), preformed packing (13), oil adapter body (14), preformed packing (15) and oil
adapter bushing (16) from APU. Retain preformed packings for installation.
6. Remove elbow (17) and pipe nipple (18) from oil adapter body (14).
7. Remove elbow (19) from oil adapter body (14).
8. Remove three nuts (20), six lockwashers (21), six flat washers (22), clamp (23), three screws (24) and mounting
plate (2) from bracket (25) and bracket (26). Discard lockwashers.
9. Remove two screws (27), two spring lockwashers (28), two flat washers (29) and bracket (25) from APU. Discard
spring lockwashers.
10. Inspect all parts for damage and replace as required.
13
2
7
8
9
10
11
19
17
18
27
28
29
25
20
21
21
22
22
23
24
26
12
16
15
14
