AUXILIARY POWER UNIT SABER GAUGE AND OIL FILLER CAP REPLACEMENT

AUXILIARY POWER UNIT SABER GAUGE REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
895

TM 9--2350--292--20--2 AUXILIARY POWER UNIT SABER GAUGE AND OIL FILLER CAP REPLACEMENT 0598 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Gasket (item 141, WP 0718 00) Equipment Conditions APU access door open (TM 9--2350--292--10) References TM 9--235 0--292--10 Removal 1. Remove saber gauge (1) from holder tube (2). 2. Remove oil filler cap (3) from oil filler tube (4). 3. Remove gasket (5) from oil filler cap (3). Discard gasket. 4. Inspect parts for damage and replace as required. Installation 1. Install new gasket (5) in oil filler cap (3). 2. Install oil filler cap (3) on oil filler tube (4). 3. Insert saber gauge (1) in holder tube (2). Figure 334 3 4 5 1 2 NOTE FOLLOW--ON MAINTENANCE: Close APU access door (TM 9--2350--292--10) END OF TASK 0598 00--1/2 blank

Privacy Statement
Press Release
Contact