TM 9--2350--292--20--2
0597 00--4
AUXILIARY POWER UNIT OIL FILTER ASSEMBLY, LINES AND BRACKET
REPAIR (HATZ) -- CONTINUED
0597 00
Installation--Continued
1. Install bracket (25) on APU with two screws (27), two new spring lockwashers (28) and two flat washers (29).
2. Install mounting plate (2) on bracket (25) and bracket (26) with three screws (24), six new lockwashers (21), six
flat washers (22), clamp (23), and three nuts (20).
3. Install elbow (19) on oil adapter body (14).
4. Install elbow (17) and pipe nipple (18) on oil adapter body (14).
5. Install oil adapter bushing (16), preformed packing (15), oil adapter body (14), preformed packing (13) and oil
adapter cap (12) on APU. Turn oil adapter cap one half turn by hand after preformed packing (15) contacts APU.
6. Install elbow (11) and reducer (10) on mounting plate (2).
7. Install pipe nipple (9), elbow (8) and reducer (7) on mounting plate (2).
13
2
7
8
9
10
11
19
17
18
27
28
29
25
20
21
21
22
22
23
24
26
12
16
15
14
