Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT UPPER AND LOWER FUEL PUMPS REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
947

TM 9--2350--292--20--2 0615 00--2 AUXILIARY POWER UNIT UPPER AND LOWER FUEL PUMPS REPLACEMENT (HATZ) -- CONTINUED 0615 00 Removal--Continued 4. Remove two screws (7), two lockwashers (8), wiring harness 3W730 wire GND (9) and lower fuel pump (4). Dis- card lockwashers. 5. Remove elbows (10 and 11) from lower fuel pump (4). 6. Disconnect wiring harness 3W730 wire 76B (12) from upper fuel pump connector (13). 7. Loosen hose clamp (14) and remove hose (15) with fitting (16) from upper fuel pump (17). 8. Loosen hose clamp (18) and remove hose (19) with fitting (20) from upper fuel pump (17). 9. Remove two screws (21), two lockwashers (22), wiring harness 3W730 wire GND (23) and upper fuel pump (17). Discard lockwashers. 10. Remove elbow (24) from upper fuel pump (17). 11. Inspect all parts and replace as required. 12 13 14 15 16 7 8 9 4 10 11 17 23 22 21 24 19 18 20

Privacy Statement
Press Release
Contact