TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
RUBBER SEALING STRIPS ON ACETYLENE COMPARTMENT DOOR MAINTENANCE
REMOVAL, CLEANING, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Removal
1.
Remove sealing strips (1) from acetylene compartment door (2) and discard.
Cleaning
1.
Clean area thoroughly by scraping off old adhesive and then removing dirt, grease, and other foreign matter with a wire
brush.
Installation
1.
Apply fresh adhesive and wait until adhesive becomes slightly tacky.
2.
Press new sealing strips (1) firmly into place to acetylene compartment door (2) and clean any excess adhesive from surface
of sealing strip.
3.
Allow adhesive to thoroughly dry before closing acetylene compartment door (2).
END OF WORK PACKAGE
0043 00-1/2 blank