TM 1-1680-320-13&P
0016 00
CAUTION
Protect hoist cable from damage. Do not allow kinks or bends to occur. Maintain
tension on cable at all times. Feed onto cable spool, coil cable into a suitable
container, or onto a protective pad, which will prevent cable contact with ground
or over abrasive surfaces.
6. Connect power (28 vdc) to hoist.
7. Position control pendant CABLE UP/DOWN switch to DOWN.
8. Extend hoist cable until winch motor stops, leaving 5 to 7 wraps of cable on drum.
0016 00-3
