TM 1-1680-320-13&P
0023 00
REMOVAL
1. Remove cable assembly in accordance with WP 0016 00.
2. Remove boomhead support assembly in accordance with WP 0018 00.
3. Remove upper support assembly in accordance with WP 0028 00.
4. Remove winch assembly (1) from lower support assembly (7) by removing washers (9) and bolts (8).
5. Remove boot (4) from motor air duct (5) and control panel fan plenum (6) by removing bands (3) and clips (2)
from boot (4).
6. Remove lower support assembly in accordance with WP 0030 00.
DISASSEMBLY
NOTES
Prior to disassembly, prepare a clean area for receiving removed parts.
Attaching hardware shall be loosely reassembled to prevent loss.
Disassemble only to extent required to remove and repair defective
components.
1. Remove limit switch drive assembly in accordance with WP 0034 00.
2. Remove electric drive motor in accordance with WP 0021 00.
3. Remove drum assembly in accordance with WP 0024 00.
0023 00-4
