TM 1-1680-320-13&P
0024 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
DRUM ASSEMBLY - ALIGN
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Parts/Materials:
Blue Loctite Compound
Lockwire (WP 0047 00, Table 1, Item 22)
Cable Spool, 42277-730 or equivalent
Tools and Special Tools:
Tool Set, Aviation Unit Maintenance
NSN 4920-00-567-0476
Tool Kit, Aircraft Mechanic
NSN 5180-00-323-4692
Auxiliary Power Unit (APU)
WARNING
Hoist cable cutter contains an explosive cartridge. Use extreme caution when
handling to prevent injury to personnel. Spark or static producing clothing is
prohibited. Anytime cable cutter harness is disconnected, install shorting device
or piece of aluminum foil between cartridge pins and install shipping cap to
prevent accidental firing.
NOTE
Drum assembly alignment properly aligns cable with reel, cable cutter assembly,
and sheave assembly. Alignment procedures are normally performed after
replacement of cable drum and cover assembly.
