TM 1-1680-320-13&P
0024 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
DRUM ASSEMBLY - INSTALLATION
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Parts/Materials:
Grease (WP 0047 00, Table 1, Item 14)
Grease (WP 0047 00, Table 1, Item 15)
Lubricant, WD-40 or equivalent
Tools and Special Tools:
N/A
NOTE
Prior to installation, rotate drum assembly to translate drum to cover.
1. Lubricate level wind screw with a light coat of grease, MIL-PRF-81322.
2. Lubricate planetary gears with a light coat of grease, MIL-G-23827.
3. Lubricate ball spline shaft with lubricant, WD-40 or equivalent.
4. Carefully install drum assembly (7) into winch housing (8).
