TM 9-2350-238-10
OPERATING INSTRUCTIONS ON DECALS AND INSTRUCTION PLATES–CONTINUED
Key
Item/Location
Description
7
Boom winch load caution
plate on inside right front
of cab.
Caution on safe operating capacity of boom winch high gear.
Caution on safe operating capacities of the boom in relation
to load weight, boom positions, boom elevation with sus-
pension locked. Indicates tow winch capacities with and
without spade emplaced.
8
Boom and tow winch
load rate capacities plate
on inside right front of
cab
9
Fire extinguisher plate on
cab fire extinguisher
Instructions for the care and use of handheld fire
extinguisher.
Warning not to touch level wind unless unit is turned off.
10
Level wind warning plate
on level wind
11
Air cleaner plates on in-
side of access doors
Instructions for servicing and replacing engine air intake
filters.
12
Contaminated (NBC)
filters warning plate on
inside of access doors
Warning that contaminated (NBC) filters must be handled
with adequate precautions.
13
Impact wrench flow con-
trol valve instruction
plate in impact wrench
compartment
Instructions for the use of impact wrench flow control valve.
Identifies low engine coolant level warning light.
14
Aeration warning plate
on aeration warning light
in driver’s compartment.
15
Governed speed plate on
instrument panel
Cautions that the government engine speed under total
load is 1,200 rpm with the hydraulic clutch engaged. Under
no load, governed speed is 1,350 rpm.
16
Air box heater and fuel
prime plate on driver’s
instrument panel
Secondary fuel filter plate
on high pressure fuel
filter
Instructions for the use of fuel purge and prime and air box
heater.
17
Notice to drain filter and replace element,
18
Primary fuel filter plate
on low pressure fuel
filter.
Notice to drain filter and replace element.
Warning to disconnect power input before servicing exciter
due to high amperage output.
19
Ignition exciter warning
plate on ignition exciter
2-107
