TM 9-2350-238-10
Table 3-1. TROUBLESHOOTING –CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAB, BOOM, AND WINCHES–CONTINUED
34. TOW WINCH WILL NOT OPERATE.
Step 1.
Check to see if tow winch shift control ( 1 ) is in center (neutral) position.
Turn shift control clockwise to LO position.
Step 2. Check to see if tow winch brake pressure selector valve (2) is pulled out.
Push pressure selector valve knob in to close valve. If winch still will
not operate, notify unit maintenance personnel.
35. LEVEL WIND DOES NOT TRAVERSE CAB.
Check to see if MASTER switch and level wind switch are in ON position.
36. LEVEL WIND
Step 1.
Set MASTER switch and level wind switches to ON position. If level
wind still does not traverse cab, notify unit maintenance personnel.
TRAVERSES CAB IN ONLY ONE DIRECTION,
Check to see if any bell connectors are disconnected at level wind sensing
switches.
Connect bell connectors,
3-26
