TM 9-2350-238-10
CALIBER .50 MACHINE GUN MOUNT, M106A1–CONTINUED
2
3
4
5
Dry cleaning solvent (SD-2) is
toxic and flammable. Wear pro-
tective goggles (item 18, appx
D) and gloves (item 17, appx D)
and use only in a well ventilated
area. Avoid contact with skin,
eyes, and clothes and don’t
breathe vapors. Do not use near
open flame or excessive heat.
The flash point is 100°F -
138°F (38°C - 50°C). If you
become dizzy while using sol-
vent, get fresh air immediately
and get medical aid. If contact
with eyes is made, wash eyes
with water and get medical aid
immediately.
Clean interior of machined surface of
mount support (3) with dry cleaning sol-
vent SD-2 (item 15, appx D) and wipe
dry. Lubricate machined surface with CLP
(item 3, appx D).
Clean all components of mount with dry
cleaning solvent SD-2 (item 15, appx D)
and wipe dry.
Inspect mount for damage and missing
parts. Notify unit maintenance personnel
of any damaged or missing parts.
(4) Ammunition box tray
(5) Equilibrator adjusting screw
(6) Support cradle
(7) Front locking pin
(8) Travel lock pin
(9) Pintle
(10) Rear locking pin
Oil all moving parts and locking pins, Use
CLP (item 3, appx D) for all temperatures.
4-2
