TM 9-2350-238-34-2
2-30. MAINTENANCE OF VEHICLE TOW DRUM WINCH (CONT).
DISASSEMBLY (CONT)
31
32
33
34
35
Remove preformed packing (52) and car-
rier housing thrust washer-bearing (53)
from stage four carrier assembly (51).
Remove 11 socket head capscrews (54)
from winch brake housing (55) on brake
control end of planetary winch drum (4).
Install four jacking screws (56) in winch
brake housing (55). Tighten until winch
brake housing (55) is free. Remove four
jacking screws (56).
Remove winch brake housing (55) from
brake control end of planetary winch
drum (4).
Remove self-aligning roller bearing (57)
from winch brake housing (55).
2-120