11
12
13
14
Working from winch control end of
planetary winch drum (5), install new
cylinder mounting plate gasket (15) and
cylinder mounting adapter plate (16) on
shaft of stage four carrier assembly (13).
Ensure cylinder mounting adapter plate
(16) is installed in same position to
mounting lugs of reaction end winch
support (10).
Install six machine screws (17) and tor-
que to 5.0 ft-lb (6.8 N-m).
MOUNTING LUGS
Install new control cylinder gasket (18)
and winch control cylinder (19) on
cylinder mounting adapter plate (16) at
winch control end of planetary winch
drum (5). Ensure inlet port of winch con-
trol cylinder (19) is positioned opposite
mounting lugs.
TM 9-2350-238-34-2
Install four new Iockwashers (20) and
four hexagon capscrews (21) securing
winch control cylinder (19) to winch con-
trol end of planetary winch drum (5).
Torque four hexagon capscrews to 18 ft-
Ib (24 N-m).
2-125
