TM 9-2350-238-34-2
2-30. MAINTENANCE OF VEHICLE TOW DRUM WINCH (CONT).
REASSEMBLY (CONT)
30 Install motor end winch support (48) on
motor end of planetary winch drum (5)
and using retaining ring pliers, secure
with retaining ring (47).
31 Release hydraulic pressure and remove
hydraulic line
step 24,
38) installed in reassembly
32 Install two shift rod annular roller bear-
ings (51) in new spool (52).
33 Using retaining ring pliers, install retain-
ing ring (53) in spool (52).
34 Install winch shift rod (54) in spool (52)
and secure with rod and bearing to
winch shaft thrust washer bearing (55),
plain slotted nut (56), and new cotter pin
(57).
35 Install new preformed packing (58) on
winch shift rod (54).
2-130
