WINCHES, BOOM, AND TRAVERSING SYSTEM WILL NOT OPERATE.

Section Ill. MAINTENANCE OF HYDRAULIC LINES AND FITTINGS

TM-9-2350-238-34-2 Recovery Vehicle Full-Tracked: Light Armored M578 (2350-00-439-6242) Manual
Page Navigation
19

TM 9-2350 -238-34-2 Table 2-1. DIRECT SUPPORT TROUBLESHOOTING (CONT) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 24. WINCHES, BOOM, AND TRAVERSING SYSTEM WILL NOT OPERATE. Step 1. Check Step 2. Check Step 3. Check for low fluid level in hydraulic reservoir. Fill hydraulic reservoir to full mark with lubricating oil (item 13, appx B). Refer to TM 9-2350-238-10. for damaged clutch in auxiliary drive. Replace or repair damaged clutch. Refer to TM 9-2350-238-34-1. for damaged hydraulic pump. Replace or repair damaged hydraulic pump. Refer to TM 9-2350-238-34-1. CAB FILTER INSTALLATION 25. CAB AIR PURIFIER UNIT DOES NOT OPERATE. Step 1. Check motor ground for bad connections. Clean ground connections with crocus cloth (item 3, appx B). Make sure ground connections are tight. Step 2. Troubleshoot cab air purifier circuit. Refer to TM 9-2350-238-20-2. If cab air purifier unit still does not operate, refer to TM 3-4240-276-30&P for repair of precleaned and housing assembly. 2-15

Privacy Statement
Press Release
Contact