OPERATING PROCEDURES - TM-9-2350-256-10

OPERATING PROCEDURES (cont) - TM-9-2350-256-10_168

TM-9-2350-256-10 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) Manual
Page Navigation
152

TM 9-2350-256-10 2-11. OPERATING PROCEDURES-Continued. (d) Have operator pay out hoist cable (9). Pass cable over top of crew compartment and under boom cross members (10). Keep hoists cables between staylines (11). (e) Pass cable (9) up and over left side of boom support (12). (f) Bring cable (9) back, going up and over left boom pulley (13). (g) Pull cable (9) forward and lay it on the lower pulley (14) of 25-ton (22.7-metric-ton) snatch block from left to right. (h) If rigging a two-part line using 10-ton (9.1-metric-ton) snatch block, close boom safety latch, hook up line to boom dead man (see para. 2-11e(2) m) and close block. NOTE If rigging a 25-ton (22.7-metric-ton) snatch block with a four-part line, continue with following steps. (i) Bring cable (9) back over upper boom cross member (15) and down under boom pulley assembly (16). (j) Pull cable (9) up and over right boom pulley (17). 2-136

Privacy Statement
Press Release
Contact