TM 9-2350-256-10
2-13. OPERATION OF AUXILIARY EQUIPMENT-Continued.
(a)
Check
FUEL
PUMP
CONTROL
handle (1) for CLOSED position.
(b)
Connect impact wrench hoses (2) to
quick disconnect couplings (3).
(c)
Move FLOW REGULATOR control
handle (4) to 10.
(d)
Turn on auxiliary hydraulic system
(see para. 2-11c).
(e)
Shift SYSTEM SELECTOR CONTROL lever (5) to REFUEL.
(f)
Adjust FLOW REGULATOR control handle (4) for approximate torque settings (see tab. 2-3). Also,
check torque requirements for item being worked on.
(g)
Bleed small amount of hydraulic fluid from hoses (2) prior to storing. This prevents pressure buildup
in lines.
(h)
Refer to TM 9-5130-388-12&P for hydraulic impact wrench operation instructions.
2-184