TM 9-2350-256-20-1
0064 00
CORRECTIVE ACTION
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts a metal surface a direct
short may result in instant heating of tools, damage to equipment, and injury or death to personnel.
1.
Remove three screws (1), three lockwashers (2), two screws (3), two lockwashers (4), and ground
strap (5), and release gage panel (6) from mounting brackets. Disconnect connector from MECH
TRANSMISSION OIL PRESSURE light. Place red lead of multimeter in wire 27E and black lead to
ground. Turn MASTER switch on, and check for voltage. Turn MASTER switch OFF. If voltage is
present, go to step 11. If voltage is not present, go to step 2.
0064 00-3
