TM 9-2350-256-20-1
0065 00
CORRECTIVE ACTION Continued
16. Disconnect wire 509 from transmission high oil temperature switch. Place red lead of multimeter
in wire 509 and black lead to ground. Turn MASTER switch on, start engine, set to idle, and check
for voltage. Turn engine and MASTER switch OFF. If voltage is present, replace transmission high
oil temperature switch (see WP 0168 00). If voltage is not present, repair/replace wire 509 of engine
wiring harness from transmission high oil temperature switch to engine disconnect (see WP 0207 00
for dual voltage; 0208 00 for single voltage).
high oil temperature switch. Place red lead of multimeter in wire 509 and black lead to ground. Turn
MASTER switch on, start engine, and check for voltage. Turn engine and MASTER switch OFF. If
voltage is present, replace engine high oil temp switch. If voltage is not present, repair/replace wire
509 of engine wiring harness from engine high oil temperature switch to engine disconnect (see WP
0207 00 for dual voltage; 0208 00 for single voltage).
END OF WORK PACKAGE
0065 00-12