TM 9-2350-256-20-1
0081 00
CORRECTIVE ACTION Continued
6.
Place a jumper wire from socket C to pin C of wire 514/515. Place red lead of multimeter on pin B of
wire 514 and black lead to ground. Turn MASTER switch on, press B.O. DRIVE key and ENTER key
of main light switch, place B.O. SELECTOR switch to IR, press dimmer switch, and check for voltage.
Turn MASTER, main lighting, B.O. SELECTOR, and dimmer switches off. If voltage is present, go to
step 8. If voltage is not present, go to step 9.
7.
Reconnect headlight and dimmer switch wiring harness to dimmer switch. Disconnect wire 515 of
headlight base assembly at connector. Place red lead of multimeter in wire 515 and black lead to
ground. Turn MASTER switch on, press B.O. DRIVE key and ENTER key of main light switch,
place B.O. SELECTOR switch to IR, and check for voltage. Turn MASTER, main lighting, and
B.O. SELECTOR switches off. If voltage is present, repair/replace wire 515 of headlight base wiring
harness (see WP 0213 00). If voltage is not present, repair/replace wire 515 of headlight and dimmer
switch wiring harness (see WP 0214 00).
0081 00-6
