TM 9-2350-256-20-1
0081 00
CORRECTIVE ACTION Continued
2.
Install lamp (3), headlight cover (2), and tighten four screws (1). Loosen adjustment nut (4) and remove
headlight assembly (5). Place red lead of multimeter in socket D of wire 515 and black lead to ground.
Turn MASTER switch ON, press B.O. DRIVE key and ENTER key of main light switch, place B.O.
SELECTOR switch to IR and check for voltage. Turn MASTER, main lighting, and B.O. SELECTOR
switches off. If voltage is present, go to step 3. If voltage is not present, go to step 5.
3.
Place red lead of multimeter in socket E of wire 514 and black lead to ground. Turn MASTER switch
on, press B.O. DRIVE key and ENTER key of mainlight switch, place B.O. SELECTOR switch to IR,
press dimmer switch, and check for voltage. Turn MASTER, main lighting, B.O. SELECTOR, and
dimmer switches OFF. If voltage is present, go to step 4. If voltage is not present, go to step 5.
0081 00-4
