TM 9-2350-256-20-1
0081 00
CORRECTIVE ACTION Continued
three screws (6) to mounting bracket. Disconnect wire 514/515 of switch panel to gage panel and
miscellaneous switches wiring harness from headlight and dimmer switch wiring harness. Place red
lead of multimeter on male connector of wire 514/515 and black lead to ground. Turn MASTER switch
on, press B.O. DRIVE key and ENTER key of main light switch, place B.O. SELECTOR switch to IR,
and check for voltage. Turn MASTER, main lighting, and B.O. SELECTOR switches off. If voltage is
present, repair/replace wire 514/515 of headlight and dimmer switch wiring harness (see WP 0214 00).
If voltage is not present, repair/replace wire 514/515 of switch panel to gage panel and miscellaneous
switches wiring harness (see WP 0204 00 for dual voltage; 0205 00 for single voltage).
13. Reconnect switch panel to gage panel and miscellaneous switches wiring harness to main switch panel.
Disconnect wire 514/515 from B.O. SELECTOR switch. Place red lead of multimeter on terminal of
switch and black lead to ground. Turn MASTER switch on, press B.O. DRIVE key and ENTER key
of main light switch, place B.O. SELECTOR switch to IR, and check for voltage. If voltage is present,
repair/replace wire 514/515 of main lighting and B.O. selector switch wiring harness (see WP 0218
00). If voltage is not present, go to step 14.
0081 00-9
