TM 9-2350-256-20-1
0082 00
CORRECTIVE ACTION Continued
lighting switches OFF. If voltage is present, replace taillight assembly (see WP 0179 00). If voltage is
not present, go to step 3.
3.
Install hydraulic access cover (6), two lockwashers (5), and two screws (4). Open air inlet doors (TM
9-2350-256-10). Disconnect bulkhead to master relay and left and right taillight wiring harness from
bulkhead. Place red lead of multimeter in socket C of wire 23 and black lead to ground. Turn MASTER
switch ON, press B.O. MARKER key and ENTER key of main light switch, apply brakes, and check
for voltage. Turn MASTER and main lighting switches OFF. If voltage is present, repair/replace wire
23 of bulkhead to master relay and left and right taillight wiring harness (see WP 0220 00). If voltage
is not present, go to step 4.
0082 00-3
