TM 9-2350-256-20-1
0083 00
CORRECTIVE ACTION Continued
2.
Install marker light (3) and cover (2) and tighten four screws (1). Loosen adjustment nut (4) and remove
headlight assembly (5).
Place red lead of multimeter in socket F of wire 20 and black lead to ground. Turn MASTER switch
ON, press B.O. MARKER key and ENTER key on main light switch, and check for voltage. Turn
MASTER and main light switches OFF. If voltage is present, replace lamp (see WP 0175 00). If voltage
is not present, go to step 3.
0083 00-4