TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
ENGINE COOLING FAN SHROUD SEALS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Equipment Condition
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Engine deck removed (see WP 0336 00)
Materials/Parts
Lockwashers (27) (item 640, WP 0491 00)
Screws (27) (item 721, WP 0491 00)
Washers, flat (27) (item 537, WP 0491 00)
Removal
1.
Remove four corner seals (1) by removing four screws (2), four lockwashers (3), and four flat washers (4).
2.
Remove two end seals (5) by removing seven screws (6), seven lockwashers (7), and seven flat washers (8).
3.
Remove 2 side seals (9) by removing 16 screws (10), 16 lockwashers (11), and 16 flat washers (12).
Installation
1.
Install 2 side seals (9) by installing 16 flat washers (12), 16 lockwashers (11), and 16 screws (10).
2.
Install two end seals (5) by installing seven flat washers (8), seven lockwashers (7), and seven screws (6).
3.
Install four corner seals (1) by installing four flat washers (4), four lockwashers (3), and four screws (2).
NOTE
Follow-on maintenance: Install engine deck (see WP 0336 00).
END OF WORK PACKAGE
0143 00-1/2 blank
