TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
ENGINE COOLING FANS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (4) (item 354, WP 0491 00)
Wrench, torque, 0175 lb-ft (0237 Nm) (item 67, WP
Screws (2) (item 403, WP 0491 00)
0490 00)
Screws (2) (item 407, WP 0491 00)
Washers, flat (2) (item 330, WP 0491 00)
Materials/Parts
Equipment Condition
Nuts (2) (item 275, WP 0491 00)
Pins, cotter (2) (item 527, WP 0491 00)
NOTE
Removal and installation procedures are the same for both the forward and rear cooling fans.
Removal
1.
Remove housing (1) by removing four screws (2) and four lockwashers (3).
0144 00-1