TM 9-2350-256-20-2
0190 00
Removal
1.
Remove eight clamps (13) by removing screw (14) and lockwasher (15) from each.
2.
Disconnect connector (1) from main engine voltage regulator (16).
3.
Disconnect connector (2) from master relay (17).
4.
Disconnect two leads (3 and 4) from slave receptacle (18) by removing screw (19) and lockwasher (20).
5.
Disconnect connector (5) from main engine disconnect (21).
6.
Disconnect two connectors (6 and 7) from bulkhead to main engine bracket and rear fuel tank transmitter wiring harness
(22).
0190 00-3
