TM 9-2350-256-20-2
0233 00
Installation
1.
Connect two connectors (11 and 12) to generator cutout switch (24).
2.
Connect connector (10) to bilge pump switch (23).
3.
Connect connector (9) to bilge pump indicator light (22).
4.
Connect connector (8) to circuit breaker No. 3 (21).
5.
Connect connector (7) to circuit breaker No. 2 (19).
6.
Connect two connectors (5 and 6) to winch light switch (20).
7.
Connect connector (4) to circuit breaker No. 2 (19).
8.
Connect connector (3) to circuit breaker No. 1 (18).
9.
Connect connector (2) to vent blower switch (17).
10. Install connector (1) to electrical accessories panel outlet (13) using four screws (14), four lockwashers (15), and four nuts
(16).
NOTE
Follow-on maintenance: Install electrical accessories panel (see WP 0158 00).
END OF WORK PACKAGE
0233 00-4
