TM 9-2350-256-20-2
0235 00
Removal
1.
Disconnect connector (1) from electrical accessories panel wiring harness (5).
2.
Disconnect connector (2) from bilge pump relay (6).
3.
Disconnect lead (3) from circuit breaker (7) by removing screw (8) and lockwasher (9).
4.
Remove cap assembly (10) from connector (4).
5.
Remove strap (11).
NOTE
Bilge pump is part of deep water fording kit. Perform step 6 if deep water fording kit is installed.
0235 00-2
