TM 9-2350-256-20-2
0271 00
Removal
NOTE
Engine exhaust pipes removed for clarity.
1.
Remove two left-side oil cooler lines (1) from transmission by disconnecting two coupling nuts (2) at two tees (3), and two
coupling nuts (4) and two reducers (5) on opposite ends of two oil cooler lines. Remove and discard two gaskets (6) from
transmission oil cooler.
2.
Remove two clamps (7) from around two right-side oil cooler lines (8) by removing screw (9), two flat washers (10), and
nut (11) from each.
3.
Remove two right-side oil cooler lines (8) by disconnecting two coupling nuts (12) at two tees (3), and two coupling nuts
(13) and two reducers (14) on opposite ends of two oil cooler lines. Remove and discard two gaskets (15) from transmission
oil cooler.
4.
Disconnect temperature transmitter (16) and pressure transmitter (17) from crosspipe (18).
5.
Remove two tees (3), crosspipe (18), and bushing (19).
0271 00-2
