TM 9-2350-256-20-2
0273 00
WARNING
Be sure to place wooden block (8) under output reduction drive (2) before removing.
5.
Place wooden block (8) under output reduction drive (2).
6.
Remove 19 self-locking bolts (9) holding output reduction drive (2) to vehicle hull.
CAUTION
Jackscrews (10) must make output reduction drive (2) clear hull to ensure proper lifting sling operation.
7.
Install two jackscrews (10) into two threaded holes in output reduction drive (2). Tighten jackscrews alternately and move
output reduction drive out approximately 2 in. (51 mm).
8.
Install lifting sling (11).
9.
Remove two jackscrews (10).
0273 00-2
