TM 9-2350-256-20-2
0309 00
Removal
1.
Remove support (1) by removing screw (2) and lockwasher (3).
2.
Remove support (4) by removing four screws (5), four lockwashers (6), four nuts (7), three screws (8), and three lockwash-
ers (9).
3.
Remove support (10) by removing two screws (11), two lockwashers (12), and two nuts (13).
4.
Remove support (14) by removing two screws (15), two lockwashers (16), and two flat washers (17).
Installation
1.
Install support (14) with two flat washers (17), two lockwashers (16), and two screws (15).
2.
Install support (10) with two nuts (13), two lockwashers (12), and two screws (11).
3.
Install support (4) with four nuts (7), four lockwashers (6), four screws (5), three lockwashers (9), and three screws (8).
4.
Install support (1) with lockwasher (3) and screw (2).
NOTE
Follow-on maintenance: Install fire extinguisher line loop clamps (see WP 0403 00); Install hydraulic
valve forward intermediate right floor plate (see WP 0308 00); Install stowage basket forward interme-
diate left floor plate (see WP 0306 00); Install hydraulic valve forward right floor plate (see WP 0288
END OF WORK PACKAGE
0309 00-2
