TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
FENDERS AND RELATED PARTS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Tool kit, general mechanic's (item 59, WP 0490 00)
Mechanics (2)
Materials/Parts
Equipment Condition
Lockwashers (106) (item 640, WP 0491 00)
Tow cables removed as required for clearance (see WP
Lockwashers (10) (item 642, WP 0491 00)
Pins (10) (item 725, WP 0491 00)
Spade lowered (refer to TM 9-2350-256-10)
Screws (10) (item 400, WP 0491 00)
Screws (10) (item 414, WP 0491 00)
Screws (96) (item 427, WP 0491 00)
NOTE
The following procedures are the same for both left- and right-sides.
Removal
WARNING
Fenders can fall when screws are removed. Be sure to secure fenders.
1.
Remove front fender (1) by removing six screws (6) and six lockwashers (7).
2.
Remove each of four fenders (2) by removing eight screws (8) and eight lockwashers (9).
0311 00-1
