TM 9-2350-256-20-2
0365 00
28. Disconnect rod assembly (88) from lever (74) by removing screw (89) and lockwasher (90). Remove rod assembly from
plate assembly (91) by removing cotter pin (92), grooved pin (93), and lubrication fitting (94). Remove rod end (95) and
nut (96) from rod assembly.
29. Remove bracket assembly (97) and lever (74) by removing lubrication fitting (98), cotter pin (99), grooved pin (100), four
screws (101), and four lockwashers (102).
30. Remove plate assembly (91) from yokes (103 and 104) by removing two cotter pins (105), two grooved pins (106), and two
lubrication fittings (107).
31. Remove yokes (103 and 104) from levers (108 and 109) by removing cotter pin (110) and straight pin (111) from each.
32. Disconnect rod assembly (112) from lever (113) and rod assembly (114) from lever (115) by removing cotter pin (116) and
straight pin (117) from each.
33. Remove rod assemblies (112 and 114) from brake-apply-and-slack adjuster levers (118) by removing cotter pin (119),
grooved pin (120), and lubrication fitting (121) from each. Remove clevis (122) and nut (123) from each end of rod
assemblies.
0365 00-8
