TM 9-2350-256-20-2
0365 00
8.
Disconnect rod assembly (28) from lever (29) by removing screw (30) and lockwasher (31). Remove rod assembly (28)
from rod assembly (32) by removing cotter pin (33) and straight pin (34). Remove rod end (35), nut (36), clevis (37), and
nut (38) from rod assembly (28).
9.
Remove levers (18 and 29) from shaft (39) by removing two retaining rings (40).
10. Loosen two setscrews (41) and remove shaft (39) from two bearing units (42).
11. Remove two bearing units (42) by removing four screws (43) and four lockwashers (44).
12. Remove six bolts (45) and six rollers (46).
13. Loosen two nuts (47) and turnbuckle (48) and remove rod assembly (32).
14. Remove two nuts (47) and turnbuckle (48).
15. Remove rod assembly (49) from rod assembly (50) by removing screw (51), lockwasher (52), and nut (53).
16. Remove clevis (54) and nut (55).
0365 00-4
