TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
BRAKE CONTROLS AND LINKAGES MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION, ALIGNMENT, ADJUSTMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Pins, straight (7) (item 711, WP 0491 00)
Pliers, retaining ring (item 36, WP 0490 00)
Rings, retaining (4) (item 456, WP 0491 00)
Punches, drive (7) (locating pins) (item 43, WP 0490 00)
Ring, retaining (item 458, WP 0491 00)
Ring, retaining (item 462, WP 0491 00)
Materials/Parts
Screws (3) (item 370, WP 0491 00)
Adhesive, rubber-base (item 3, WP 0489 00)
Screws (2) (item 375, WP 0491 00)
Bearing (item 295, WP 0491 00)
Screws (8) (item 418, WP 0491 00)
Bearing unit (item 10, WP 0491 00)
Screws (7) (item 422, WP 0491 00)
Bearing units (2) (item 88, WP 0491 00)
Screw (item 423, WP 0491 00)
Bearing units (2) (item 232, WP 0491 00)
Screws (4) (item 785, WP 0491 00)
Bearing unit (item 236, WP 0491 00)
Screws (4) (item 786, WP 0491 00)
Bolts (6) (item 339, WP 0491 00)
Screws (6) (item 801, WP 0491 00)
Boot, rubber (item 34, WP 0491 00)
Setscrews (2) (item 751, WP 0491 00)
Bushing, rubber (item 8, WP 0491 00)
Washers, flat (3) (item 537, WP 0491 00)
Clamp, hose (item 3, WP 0491 00)
Lockwashers (5) (item 638, WP 0491 00)
References
Lockwashers (6) (item 640, WP 0491 00)
Lockwashers (16) (item 642, WP 0491 00)
TM 9-2350-256-10
Lockwashers (8) (item 644, WP 0491 00)
Nut (item 269, WP 0491 00)
Equipment Condition
Nuts (13) (item 686, WP 0491 00)
Nuts (3) (item 687, WP 0491 00)
Powerplant removed (see WP 0098 00)
Nut (item 764, WP 0491 00)
Left-side air cleaner removed (see WP 0137 00)
Pin, cotter (item 522, WP 0491 00)
Cab subfloor plates removed (see WP 0286 00 thru 0308
Pins, cotter (12) (item 525, WP 0491 00)
00)
Pin, grooved (item 9, WP 0491 00)
Air inlet doors removed as necessary (see WP 0341 00)
Pin, grooved (item 35, WP 0491 00)
Air inlet grilles removed as necessary (see WP 0342 00)
Pins, grooved (4) (item 95, WP 0491 00)
Ammunition rack removed (see WP 0386 00)
Pin, spring (item 449, WP 0491 00)
Toolbox rack removed (see WP 0389 00)
Pin, straight (item 7, WP 0491 00)
Oddment tray removed (see WP 0390 00)
NOTE
Only remove or open items necessary to gain access to area of linkage requiring removal.
0365 00-1
