TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
ACCELERATOR CONTROLS AND LINKAGES MAINTENANCE
REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, REPAIR, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (9) (item 402, WP 0491 00)
File, thread restorer (item 14, WP 0490 00)
Screws (2) (item 403, WP 0491 00)
Screw (item 596, WP 0491 00)
Materials/Parts
Screws (2) (item 800, WP 0491 00)
Bearing housings (2) (item 89, WP 0491 00)
Screw (item 802, WP 0491 00)
Bearing units (2) (item 90, WP 0491 00)
Spring (item 254, WP 0491 00)
Bolts (6) (item 339, WP 0491 00)
Washers, flat (6) (item 537, WP 0491 00)
Boot, rubber (item 233, WP 0491 00)
Washers, flat (3) (item 539, WP 0491 00)
Bushing, rubber (item 338, WP 0491 00)
Washer, flat (item 541, WP 0491 00)
Clamp (item 712, WP 0491 00)
Keys (4) (item 700, WP 0491 00)
References
Lockwashers (6) (item 638, WP 0491 00)
Lockwashers (12) (item 640, WP 0491 00)
Nuts (4) (item 680, WP 0491 00)
Equipment Condition
Nuts (7) (item 682, WP 0491 00)
Nuts (2) (item 685, WP 0491 00)
Powerplant removed (see WP 0098 00)
Nuts (7) (item 769, WP 0491 00)
Left-side air cleaner removed (see WP 0137 00)
Nuts, self-locking (3) (item 490, WP 0491 00)
Cab subfloor plates removed (see WP 0286 00 thru 0308
Pins, cotter (3) (item 525, WP 0491 00)
00)
Pin, headed (item 39, WP 0491 00)
Air inlet doors removed as necessary (see WP 0341 00)
Pin, straight (item 743, WP 0491 00)
Air inlet grilles removed as necessary (see WP 0342 00)
Ring, retaining (item 460, WP 0491 00)
Ammunition rack removed (see WP 0386 00)
Screws (5) (item 374, WP 0491 00)
Toolbox rack removed (see WP 0389 00)
Screws (4) (item 376, WP 0491 00)
Oddment tray removed (see WP 0390 00)
NOTE
Only remove or open items necessary to gain access to area of linkage requiring removal.
0363 00-1
