TM 9-2350-256-20-2
0361 00
25. Install two nuts (9) and two clevis (7 and 8) to rod (6).
NOTE
Be sure that rod (6) is installed with clevis (8) at bottom of rod.
26. Install rod (6), two washers (5), straight pin (4), and two cotter pins (3).
27. Install straight pin (2) and cotter pin (1).
NOTE
Follow-on maintenance: Only install or close items necessary to gain access to area of linkage requiring
removal. Install oddment tray (see WP 0390 00); Install toolbox rack (see WP 0389 00); Install ammu-
nition rack (see WP 0386 00); Install air inlet grilles if removed (see WP 0342 00); Install air inlet doors
if removed (see WP 0341 00); Install cab subfloor plates (see WP 0286 00 thru 0308 00); Install left-side
air cleaner (see WP 0137 00); Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0361 00-17/18 blank
