TM 9-2350-256-20-2
0365 00
4.
Disconnect rod assembly (13) from brake cam assembly (8) by removing cotter pin (14) and straight pin (15).
5.
Remove rod assembly (13) by removing screw (16) and lockwasher (17) from lever (18).
6.
Remove two blocks (19) from rod assembly (13) by removing two screws (20) and two lockwashers (21). Remove rod end
(22) and nut (23) from rod assembly.
7.
Remove brake cam assembly (8) from bracket assembly (24) by removing spring pin (25), shaft (26), and lubrication fitting
(27).
0365 00-3
