TM 9-2350-256-20-2
0439 00
Installation
NOTE
Steps 1 thru 9 apply only to left side.
1.
Install frame assembly (45) with three screws (47) and three lockwashers (48).
2.
Install M2A2 air purifier (27) in frame assembly (45) and close catch assembly (46).
3.
Install two clamps (37) and clamp (42) each with screw (43) and lockwasher (44).
4.
Connect and install AFT passenger's hose (41) on manifold of M2A2 air purifier (27) and clamp (42).
5.
Connect and install driver's hose (35) and FWD passenger's hose (36) on manifold of M2A2 air purifier (27) and clamps
(37). Secure hoses to vehicle with 12 clamps (38). Each pair of clamps is held by screw (39) and lockwasher (40).
6.
Install circuit breaker and switch assembly (26) with two screws (33) and two lockwashers (34).
7.
Connect ground wire (30) on M2A2 air purifier (27) with screw (31) and lockwasher (32).
8.
Connect cable assembly (28) from circuit breaker and switch assembly (26) to dome light (29).
0439 00-6
